Author Topic: can some damaged tubes be revitalized  (Read 4504 times)

Offline Nick B

  • Audio Neurotic
  • *****
  • Posts: 4205
can some damaged tubes be revitalized
« on: March 30, 2020, 07:25:51 PM »
Saw this on YouTube. I wasn’t aware this was possible. Comments, pls

https://www.youtube.com/watch?v=Uv0D1-2cVg0
Orchard Starkrimson Ultra amp
Hattor Big preamp
JMR Voce Grande speakers
Holo Cyan2 dac
Holo Red streamer
Hapa Aero digital coax
WyWires Silver cables
TWL Digital American II p cord
Audio Envy p cords
Roon, Tidal, Qobuz
PI Audio UberBUSS

Offline steve

  • Audiologist
  • *
  • Posts: 1274
Re: can some damaged tubes be revitalized
« Reply #1 on: March 31, 2020, 07:05:14 AM »
Yes Nick it is possible for Thoriated Tungsten cathodes, depending upon how much thorium is left in the interior cathode tungsten filament. IF I remember correctly, with no plate voltage, run the filament 20% above normal for a few minutes. Repeat as necessary. The thorium will "boil" to the surface and emission will increase, if there is thorium left.

The only oxide cathodes I have ever seen improve is in picture tubes. There are usually several stages of a picture tube rejuvenator one can try. The highest stage actually causes sparks inside the tube, ripping off the outer layer of oxide material from the cathode so fresh material is now on the surface. Sometimes it works, sometimes it ripped off all the material, or what was left.

cheers

steve

Steve Sammet (Owner, Electron Eng, SAS Audio Labs, Ret)
SAS "V" 39pf/m 6N copper ICs,
SAS Test Phono Stage
Acutex 320 STR Mov Iron Cart
SAS 11A Perfect Tube Preamp
SAS 25 W Ref Triode/UL Monoblocks
2 way Floor Standing Test Speakers