Danville Signal will be doing an AB demo of a pair of Magnepan 1.7i planar speakers with both passive and DSP crossovers.
The speaker will be setup with a single amp driving the passive crossover and tri-amped with the DSP crossover with a switch box to choose between the crossovers with the same source. All amps will be identical. They will be driving the Magnepan 1.7i's full range with the system.
The system will be at AXPONA 2024 in room 356. Please stop by to hear the Magnepan 1.7i crossover comparison.
Good luck, Rich! Enjoy the show.
Nick
Nick,
Thanks, but I am not at AXPONA 2024.
Danville Signal in room 356 has the Magnepan 1.7i's that I helped with the DSP crossover design for tri-amping them with the dspNexus 2x8 system.
They built the AB switching box for the demo. All the amps are the same as well as the front end uses all 8 channels of the dspNexus 2x8. Two channels are just direct DAC connections to the amps driving the original passive crossovers and the other 6 DAC's are the 3-way DSP crossover to the amps.
Feedback so far is that the demo is showing the listeners how not subtle the difference the DSP crossover can make when it is really at the state of the art. :)
Response from Cynthia, The Audio Belle on YouTube to the AB comparison was it was a night and day difference, she could not believe the difference between the original passive crossover and the DSP crossover versions.
Works for me! :)
Quote from: HAL on April 13, 2024, 03:59:16 PM
Response from Cynthia, The Audio Belle on YouTube to the AB comparison was it was a night and day difference, she could not believe the difference between the original passive crossover and the DSP crossover versions.
Works for me! :)
👍
Quote from: HAL on April 13, 2024, 11:47:50 AM
Nick,
Thanks, but I am not at AXPONA 2024.
Danville Signal in room 356 has the Magnepan 1.7i's that I helped with the DSP crossover design for tri-amping them with the dspNexus 2x8 system.
They built the AB switching box for the demo. All the amps are the same as well as the front end uses all 8 channels of the dspNexus 2x8. Two channels are just direct DAC connections to the amps driving the original passive crossovers and the other 6 DAC's are the 3-way DSP crossover to the amps.
Feedback so far is that the demo is showing the listeners how not subtle the difference the DSP crossover can make when it is really at the state of the art. :)
Rich,
I don't keep up with the shows that much. Will you be attending any other events for the rest of the year?
Nick
Quote from: Nick B on April 13, 2024, 08:16:32 PM
Quote from: HAL on April 13, 2024, 11:47:50 AM
Nick,
Thanks, but I am not at AXPONA 2024.
Danville Signal in room 356 has the Magnepan 1.7i's that I helped with the DSP crossover design for tri-amping them with the dspNexus 2x8 system.
They built the AB switching box for the demo. All the amps are the same as well as the front end uses all 8 channels of the dspNexus 2x8. Two channels are just direct DAC connections to the amps driving the original passive crossovers and the other 6 DAC's are the 3-way DSP crossover to the amps.
Feedback so far is that the demo is showing the listeners how not subtle the difference the DSP crossover can make when it is really at the state of the art. :)
Rich,
I don't keep up with the shows that much. Will you be attending any other events for the rest of the year?
Nick
Nick,
If I can get a larger room for CAF2024 in Nov that is possible. I am working with the show owner now to see if one is available.
This will not be a comparison demo like the Magnepan 1.7i's at AXPONA. I will bring the AGN II Line Array's with two 6x12in OB servo subs. I want to demo the dspNexus 2x8 system with the AK4499EX DAC's in a larger speaker system.
Rich
Rich
Quote from: HAL on April 14, 2024, 05:31:16 AM
Quote from: Nick B on April 13, 2024, 08:16:32 PM
Quote from: HAL on April 13, 2024, 11:47:50 AM
Nick,
Thanks, but I am not at AXPONA 2024.
Danville Signal in room 356 has the Magnepan 1.7i's that I helped with the DSP crossover design for tri-amping them with the dspNexus 2x8 system.
They built the AB switching box for the demo. All the amps are the same as well as the front end uses all 8 channels of the dspNexus 2x8. Two channels are just direct DAC connections to the amps driving the original passive crossovers and the other 6 DAC's are the 3-way DSP crossover to the amps.
Feedback so far is that the demo is showing the listeners how not subtle the difference the DSP crossover can make when it is really at the state of the art. :)
Rich,
I don't keep up with the shows that much. Will you be attending any other events for the rest of the year?
Nick
Nick,
If I can get a larger room for CAF2024 in Nov that is possible. I am working with the show owner now to see if one is available.
This will not be a comparison demo like the Magnepan 1.7i's at AXPONA. I will bring the AGN II Line Array's with two 6x12in OB servo subs. I want to demo the dspNexus 2x8 system with the AK4499EX DAC's in a larger speaker system.
Rich
Rich
Thx, Rich
The Audiophile Junkie stopped by for the Magnepan 1.7i AB demo:
https://www.youtube.com/watch?v=jzFxG8KPIEE
Quote from: HAL on April 14, 2024, 04:02:22 PM
The Audiophile Junkie stopped by for the Magnepan 1.7i AB demo:
https://www.youtube.com/watch?v=jzFxG8KPIEE
Very interesting, Rich. Thx for posting.
More insights from the Audiophile Junkie on the Danville Signal room at AXPONA 2024 AB demo.
His discussion about the room starts at 9:30 into the video.
https://www.youtube.com/watch?v=lrqCL7gcFCE
The Absolute Sound posted a wrap-up with the Danville Signal room as well:
The Danville Signal part starts at 10:10 in the video.
https://www.youtube.com/watch?v=c1s12SK__j0