Remove those WBT Spades.

Started by rollo, September 30, 2010, 07:32:03 AM

Previous topic - Next topic

rollo

   As an experiment I removed the WBT connectors from the Morey James speaker cables. To my surprise a less strident and more natural presentation. The WBTs are the model before the Nextgens came out.
   The WBTs are definitely bright sounding. try removing the connectors if they are the screw down type you may be very happy you did.


charles
contact me  at rollo14@verizon.net or visit us on Facebook
Lamm Industries - Aqua Acoustic, Formula & La Scala DAC- INNUOS  - Rethm - Kuzma - QLN - Audio Hungary Qualiton - Fritz speakers -Gigawatt -Vinnie Rossi,TWL, Swiss Cables, Merason DAC.

tmazz

Quote from: rollo on September 30, 2010, 07:32:03 AM
   As an experiment I removed the WBT connectors from the Morey James speaker cables. To my surprise a less strident and more natural presentation. The WBTs are the model before the Nextgens came out.
   The WBTs are definitely bright sounding. try removing the connectors if they are the screw down type you may be very happy you did.


charles

Did you replace them with another kind of connector or were you able to terminate the bare wire right onto you amp and/or speakers?
Remember, it's all about the music........

Nola Boxers
Sunfire True SW Super Jr (2)
McIntosh MC 275
ARC SP-9
VPI HW-19 Mk IV/SDS/SAM/SME IV/Soundsmith Carmen Mk II ES
Pro-Ject Pre Box S2 DAC/Rasp Pi Roon Endpoint
DigiBuss/TWL PC & USB Cables

rollo

 Just twisted the bare wire together. To my suprise it is tin coated copper. I thought Supra was the only Manf. using tin coated wire. So far so good.


charles
contact me  at rollo14@verizon.net or visit us on Facebook
Lamm Industries - Aqua Acoustic, Formula & La Scala DAC- INNUOS  - Rethm - Kuzma - QLN - Audio Hungary Qualiton - Fritz speakers -Gigawatt -Vinnie Rossi,TWL, Swiss Cables, Merason DAC.

richidoo

Direct wire connection will sound better while it is tight because you are removing the alloy spade and the wire to spade connection. But the raw strands will loosen quickly. The spade is a springy alloy that pushes back against the nut so that it never comes loose. That's why spades can't be pure copper, it flows too easily, not springy enough. But the alloy is potentially slightly less conductive. Trade off for convenience and better sound overall. Eventually you will forget to tighten the speaker post and wonder where's the bass, because damping factor is shot from the loose connection.

If you do bare wires, wrap them around the post so that when they come loose it only affects sound quality, and can't fall off the post and make a short.

_Scotty_

I use Analysis Plus spades on my speaker cables with a gas tight crimp on the power amp side . The speaker side is a bare wire connection.
Scotty

Face

I've never been crazy about WBT's spades, except for how well they fit in their associated binding posts. 

Goertz has a pure silver spade that isn't too expensive.  http://soniccraft.com/products/connections/spade/goertz.htm

Vampire also makes a few different gold plated copper spades that are cheap!  http://soniccraft.com/products/connections/spade/vampire.htm

rollo

  They will remain NUDE. No connectors thankyou. The connection appears to be tight as a crabs arse. Well for now anyway.


charles
contact me  at rollo14@verizon.net or visit us on Facebook
Lamm Industries - Aqua Acoustic, Formula & La Scala DAC- INNUOS  - Rethm - Kuzma - QLN - Audio Hungary Qualiton - Fritz speakers -Gigawatt -Vinnie Rossi,TWL, Swiss Cables, Merason DAC.

Triode Pete

The BEST Connector is "No Connector"!
www.TriodeWireLabs.com
WT Reference/Lyra Titan I
Quadratic Audio MC-1
Custom BorderPatrol preamp with phono & line stage
Innuos Statement Server
BorderPatrol S20 EXD w/EXS PS
Klipschorns - Volti hot-rodded
UberBUSS