Show us your vinyl setup

[Response Audio]

I thought it would be a good idea to start a thread where everyone could show, describe and talk about our vinyl systems.

Don't forget to describe or at least list the complete system.

Let's have some fun.

[Face]

Here's my modded Rega.

[Audiosme]

My Technics SP25 on a custom plint with a Sumiko Tonearm and Sumiko cartridge

[sleepyguy24]

Here are close-ups of my secondary turntable set up. It is a Concept 2QD turntable with an AT-10 cart with AT-11SE stylus.

The table has a busted foot so I tried to make feet for it on the cheap. It is homely looking but so far the sound is quite nice. Phono preamp is from my Accuphase C-200.

[Response Audio]

Here are a few pictures of the custom turntable I use to spin vinyl and perform listening test of the Basis mkII Phono preamplifier. It is constructed of 7/8" thick solid Hard Maple with accents and inlays made of Mahogany.
The table itself started out as an Audio Note TT1 and runs an AN arm and cartridge.

I listened to it yesterday for the first time since the flood last September.

[StereoNut]

Here are a few pictures of the custom turntable I use to spin vinyl and perform listening test of the Basis mkII Phono preamplifier. It is constructed of 7/8" thick solid Hard Maple with accents and inlays made of Mahogany.
The table itself started out as an Audio Note TT1 and runs an AN arm and cartridge.

I listened to it yesterday for the first time since the flood last September.

Niiiiiiiiice!!!!!!

[tmazz]

......I listened to it yesterday for the first time since the flood last September.

       

[Response Audio]

Thanks guys. We just rolled out the Basis mkII Phono preamp and figured this would be a good time to set up the new table. The original plinth was ruined in the flood so I had to build a new one. It has sat without being used for several months.
After hearing vinyl again, not sure why I waited so long

[eleazar]

My VPI w/ the platter lit up by a single LED

[BobM]

oooooooooh ... aaaaaaaaah
Pretty lights!

My VPI platter is the old, all black one, Not much I can do to pretty that up.

[tmazz]

My VPI w/ the platter lit up by a single LED

Wjat's the matter, you couldn't find an orange LED?   

[eleazar]

My VPI w/ the platter lit up by a single LED

Wjat's the matter, you couldn't find an orange LED?   

No I couldn't but blue like the McIntosh would be nice

[_Scotty_]

pumpkinman, Here is an orange LED
http://www.digikey.com/product-detail/en/HLMP-EJ30-NR0DD/516-2276-1-ND/2428166
and blue LEDs
http://www.digikey.com/product-detail/en/C5SMF-BJS-CR24Q4T2/C5SMF-BJS-CR24Q4T2CT-ND/2242698
http://www.digikey.com/product-detail/en/LTL2P3TBK5/160-1611-ND/573516

Scotty

[eleazar]

pumpkinman, Here is an orange LED
http://www.digikey.com/product-detail/en/HLMP-EJ30-NR0DD/516-2276-1-ND/2428166
and blue LEDs
http://www.digikey.com/product-detail/en/C5SMF-BJS-CR24Q4T2/C5SMF-BJS-CR24Q4T2CT-ND/2242698
http://www.digikey.com/product-detail/en/LTL2P3TBK5/160-1611-ND/573516

Scotty

Thanks Scotty for taking the time to locate the links.....Bill

[etcarroll]

Bill - you gotta go with orange, I mean really now, you're the P-man.