Author Topic: voltage and current burn in  (Read 5505 times)

Offline Nick B

  • Audio Neurotic
  • *****
  • Posts: 4227
voltage and current burn in
« on: May 16, 2022, 10:20:01 PM »
I’ve had the Hagerman burn in devices for a while … Frybaby3 for cables and Frycorder2 for power cords. They work great. Nowadays I don’t want to spend time listening for many hours to monitor changes in SQ.

When I read the user manual for the first time, there were instructions for a voltage and for a current burn in. I’d never heard of this before. The voltage burn in mode is for 2 days and requires the cables are only connected to the device on one end. The current mode is 3 days and the cables are connected on both ends to create a loop. Here’s a link from the Hagerman website
https://cdn.shopify.com/s/files/1/0433/2441/files/Connections.pdf

There are other burn in devices on the market, but I’m not familiar with them. Do most of the other devices use both modes or just voltage or just current? Ultimately, if there are enough hours on your system, does it really matter what method(s) are used to getting the maximum performance out of the cables?

Nick
Orchard Starkrimson Ultra amp
Hattor Big preamp
JMR Voce Grande speakers
Holo Cyan2 dac
Holo Red streamer
Hapa Aero digital coax
WyWires Silver cables
TWL Digital American II p cord
Audio Envy p cords
Roon, Tidal, Qobuz
PI Audio UberBUSS

Offline Folsom

  • Obsessively Audiophilic
  • ****
  • Posts: 862
Re: voltage and current burn in
« Reply #1 on: May 17, 2022, 12:25:25 AM »
Good question, how many more devices are there?

Offline Emil

  • Audio Neurotic
  • *****
  • Posts: 1171
Re: voltage and current burn in
« Reply #2 on: May 17, 2022, 04:53:40 AM »
ATTENTION CABLE MANUFACTURERS!!!!

BURN IN THE CABLES FOR YOUR CUSTOMERS :duh

Ridiculous that this needs to be done by the consumer.

Rant over :lol:

"Today I didn't even have to use my A.K.
I got to say it was a good day"
    --Ice Cube

Offline Nick B

  • Audio Neurotic
  • *****
  • Posts: 4227
Re: voltage and current burn in
« Reply #3 on: May 17, 2022, 10:25:18 AM »
Good question, how many more devices are there?

I found these…
AudioKharma Cable Cooker
https://www.thecablecooker.com/

Nordstrom Vidal 2
https://www.hifinext.com/cable-burn-device-the-nordost-vidar/
Orchard Starkrimson Ultra amp
Hattor Big preamp
JMR Voce Grande speakers
Holo Cyan2 dac
Holo Red streamer
Hapa Aero digital coax
WyWires Silver cables
TWL Digital American II p cord
Audio Envy p cords
Roon, Tidal, Qobuz
PI Audio UberBUSS

Offline Triode Pete

  • Industry Participant
  • *
  • Posts: 1482
  • Strive for Perfection, Settle on Excellence!
    • Link to System Details & Photos
Re: voltage and current burn in
« Reply #4 on: May 17, 2022, 03:24:58 PM »
ATTENTION CABLE MANUFACTURERS!!!!

BURN IN THE CABLES FOR YOUR CUSTOMERS :duh

Ridiculous that this needs to be done by the consumer.

Rant over :lol:

All of TWL cables are preliminary "burned-in" using a High Power audiodharma Cable Cooker prior to shipping...

So there!

Cheers,
Pete
www.TriodeWireLabs.com
WT Reference/Lyra Titan I
Quadratic Audio MC-1
Custom BorderPatrol preamp with phono & line stage
Innuos Statement Server
BorderPatrol S20 EXD w/EXS PS
Klipschorns - Volti hot-rodded
UberBUSS

Offline tmazz

  • Out Of My Speaker Cabinet
  • ******
  • Posts: 12088
  • Just basking in the glow of my tubes.....
Re: voltage and current burn in
« Reply #5 on: May 17, 2022, 03:56:12 PM »
ATTENTION CABLE MANUFACTURERS!!!!

BURN IN THE CABLES FOR YOUR CUSTOMERS :duh

Ridiculous that this needs to be done by the consumer.

Rant over :lol:

Stop  ](*,)  You just need to buy from the right cable company.   :D

From the Triode Wire Labs web site:

"All cords are “burned-in” at TWL, featuring a BRAND NEW audiodharma CABLE COOKER™ HIGH POWER Anniversary Edition 3.5 with premium all-copper billet Cardas CCGR binding posts. Only Three in the World & Triode Wire Labs has one!"
Remember, it's all about the music........

Nola Boxers
Sunfire True SW Super Jr (2)
McIntosh MC 275
ARC SP-9
VPI HW-19 Mk IV/SDS/SAM/SME IV/Soundsmith Carmen Mk II ES
Pro-Ject Pre Box S2 DAC/Rasp Pi Roon Endpoint
DigiBuss/TWL PC & USB Cables

Offline P.I.

  • Industry Participant
  • *
  • Posts: 1977
  • Silence is that blackness beneath the music
    • P.I. audio group, LLC
Re: voltage and current burn in
« Reply #6 on: May 17, 2022, 08:22:29 PM »
ATTENTION CABLE MANUFACTURERS!!!!

BURN IN THE CABLES FOR YOUR CUSTOMERS :duh

Ridiculous that this needs to be done by the consumer.

Rant over :lol:
:thumb:

Stop  ](*,)  You just need to buy from the right cable company.   :D

From the Triode Wire Labs web site:

"All cords are “burned-in” at TWL, featuring a BRAND NEW audiodharma CABLE COOKER™ HIGH POWER Anniversary Edition 3.5 with premium all-copper billet Cardas CCGR binding posts. Only Three in the World & Triode Wire Labs has one!"
"A man with an experience is never at the mercy of a man with an argument." - Hilmar von Campe

Offline rollo

  • Industry Participant
  • *
  • Posts: 6957
  • Rollo Audio - Home demo the only way to know
Re: voltage and current burn in
« Reply #7 on: May 20, 2022, 09:55:31 AM »
  Agree Cable Manf should burn in 100%. Some cables were over 500 hours to stop changing. Do not get me going with Rhodium plugs and receptacles. Torture but when done worth the pain.

charles
contact me  at rollo14@verizon.net or visit us on Facebook
Lamm Industries - Aqua Acoustic, Formula & La Scala DAC- INNUOS  - Rethm - Kuzma - QLN - Audio Hungary Qualiton - Fritz speakers -Gigawatt -Vinnie Rossi,TWL, Swiss Cables, Merason DAC.

Offline P.I.

  • Industry Participant
  • *
  • Posts: 1977
  • Silence is that blackness beneath the music
    • P.I. audio group, LLC
Re: voltage and current burn in
« Reply #8 on: May 20, 2022, 03:22:32 PM »
  Agree Cable Manf should burn in 100%. Some cables were over 500 hours to stop changing. Do not get me going with Rhodium plugs and receptacles. Torture but when done worth the pain.

charles
Companies that sell large volumes of cables will be hard pressed to do this. Smaller companies like TWL and me (in the past... and sometimes now) do this. 

When I get a batch of wire in I find the destination end of the spool and hook it up to a load and burn the whole spool for about a week.  Then, when I build the cable(s) I burn them for a couple of days, typically.

My burn-in device is a 3A 48V transformer with a variac controlling the voltage that has a random noise generator hooked up to the whole thing that cycles from 2Hz > a couple of GHz that was an inexpensive buy from eBay and it works well.  The 3A @ 48V transformer really doe the job on power cables and speaker cables.  I have switchable loads from 1 ohm to 500K ohms.

I can also run this puppy hooked up to wire when I cryo it  :thumb:  That method takes 3 days...

I have a batch of wire hooked up to it as I type.

OCD at it's best.  I'm so me...
« Last Edit: May 20, 2022, 03:34:21 PM by P.I. »
"A man with an experience is never at the mercy of a man with an argument." - Hilmar von Campe